I think my "Made in China" adapter is broken or something like that. I tried with other cars, including Palio 1.0 8V and the MCE says the time for connection is over, check you serial port settings and thry again. I had similar problem and found the solution here: http://forum.multiecusca...

yani wrote:Which model/year is your car?

For your question I guess you surprised yourself with some information.
The scanning of Multiecuscan found older versions of ABS, Airbag, etc. Is it?

Fiat Punto 1.6 16V - year 2011
Fiat Punto (Brazil) = Grande Punto
All e-torq engines (1.6 and 1.8) fitted to Fiat Brazil / Argentina are the same from 2010 onwards.

Fiat E.torQ engine: http://en.wikipedia.org/wiki/Fiat_E.torQ_engine

Multiecuscan 1.2R1: It reports wrong "ISO Code" (see image below) http://i.imgur.com/qyiv1.jpg Scanning ... Engine UNKNOWN/UNSUPPORTED ISO Code: CD 85 83 8A 34 ABS Bosch ABS 8 ISO Code: 25 86 A8 86 AE Airbag AUTOLIV MY06 Airbag ISO Code: EA 07 92 86 5E Body Body Computer Delphi (3) ISO Cod...

You are right! Compared with an image of "Supported Vehicles" I saw the wrong side.
After correction of the jump to correct pins the ELM is connecting to ABS system.

Thank you very much for your help!!

Great! I'll be waiting for this release.

Thanks!

My ELM is in aluminum alloy housing.

Below photo of the connector with the jump from pin 1 to pin 7
Pin 16 not connected to the circuit ELM

Thanks for the reply. I may have found the reason for the ELM327 1.5a not work with ABS. In the "Supported Vehicles" section it is shown (adapter cable 1) that the pin 16 of the male connector must connect to pin 16 of the female connector. However the pin 16 of the male connector (ELM327 ...

I am confused as to the connections described in the "Supported Vehicles" section, why pin 1 (ABS) should be permanently connected to pins 7, 9 and 12. But, for Punto EVO pin 9 should not be connected to pin 1. I connected pin 1 to pin 7 but ELM327 does not connect the ABS and multiecuscan...

One additional information: Last year Fiat sold 754,095 vehicles in Brazil, these vehicles about 55% were equipped with engine e-torq managed by Magneti Marelli IAW 7GF.

I believe the support Magneti Marelli IAW 7GF will meet the need for many mechanical repairers and Fiat enthusiasts.