Check you car here: https://www.multiecuscan.net/SupportedVehiclesList.aspx I'm a little confused by your post as you say you are using the Green Adapater Cable (Pin 9) and can with this connect to other systems including ABS and Airbag but the only systems that use Green / Pin 9 are the Automatic G...

Try using a slower BAUD rate. Try 9600 and other rates.

Are you sure you have the correct COM port. To check go to Windows Device Manager and see which port the KKL interface is actually connected to. These is also in MES settings the Scan For Interfaces button. If you can see the KKL device in Device Manager but MES can not locate then you need to resol...

As for work involved I have no idea. Generally new ISO codes are generally (I think but don't know for sure) New ECU makes/model or updated ECUs to comply with legal/other requirements. The ISO code (I think) is if you like a hardware/software version reference number. If new ECU then potentially a ...

Send an Email to support@multiecuscan.net quoting your vehicle, ECU and ISO code.

I don't know how they get new/updated ISO codes so dropping them an EMail will do not harm.

Can you post the FULL exception information.

You should be able to enlarge the window and select and copy the contents.

ISO codes crop up from time to time either from never supported or it then changed after a software update (quite rare as far as I can tell). Some people get around the never supported issue by choosing another vehicle with the same engine ECU. With regards to MES updates they vary but normally once...

Try support@multiecuscan.net

https://www.multiecuscan.net/Contact.aspx

Hi m.a.l.fa

I'm responding as moderator here.

I suggest you contact MES support directly. Whilst there is this "Bugs and Feature Request" section here MES Support use community support here to help off load / free up their direct support.

Contact MES Support directly.

Like you I'm hoping that someone will have further information on this. This is what I understand; 1) As you know on some later models the BCM is integrated into the BCM 2) Currently I believe you bypass this by connecting to the CAN Lines down stream of the BCM. That said there may be issues with s...