Does anyone know if and when support might be added for the later Multijet3 2.2 engine please?
We have a 2020 Peugeot Boxer with the 2.2 BlueHDi, engine, but Multiecuscan 5.3R1 doesn't connect to it
Many thanks
Trev

So, we decided to cut our losses and send it to crash data for them to configure it for us as things were taking too long when we need to use the camper
It came back today and everything is fine now
Thanks for the suggestions along the way

Hello there
Not sure what the feslog is, might you mean the "vehicle diagnostics report" that it exports as a PDF?
If yes, its attached above
And, I think the detail you mention might be the following?
[102A] errors - Byte 59: 0B->0A
Thanks
Trev

Ran OK on our 2020 2.2ltr Peugeot Boxer, but had to choose the Ducato (type 290) 2.3 Multijet as vehicle model to get it to run correctly It returned to say Proxy Alignment not required and then correctly listed the modules So, we take it to mean there is an issue on the Ducato with the new module T...

We have a 2020 Peugeot Boxer 2.2 BlueHDi based motorhome
Which Fiat model do we pick in Multiecuscan 5.3R1 please?
Been using "Ducato (type 290) 2.3 Multijet", but worried that I will mess things if that's wrong
Many thanks
Trev

As we're not sure if this is down to the kit we're using, I've ordered a Vgate vLinker FS OBD2 USB Adapter to avoid using bluetooth and a new yellow adaptor, just in that's at fault Going to test the current kit on my Peugeot Boxer tomorrow, so one way or another we will know if its the Ducato elect...

Hello there
Old unit 01375110080
New unit 00046858203
Thanks
Trev

I've added a copy of the Diagnostics report, should that help with our post
Many thanks
Trev

2015 Ducato (type 290) 2.3 Multijet (Campervan) Had the airbag module sent away to Crash-Data twice, but each time it failed again, so we bought a new unit, which whilst not identical, we are told that it is compatible, but after installing it shows the airbag warning light When running Multiecuscan...

I had to go into the radio module and enable the navigation part of the radio as I had replaced the original and basic radio (no nav or CD) that comes with a Boxer and the the proxy alignment ran OK
Hop that works for you
Trev