Ducato - Empty PROXI file in Body Computer (BCM)!

[georgedani]

I am trying to connect to CAN Setup / PROXI Alignment Procedure (290) and software keep returning the following error

"Empty PROXI file in Body Computer (BCM)!"

I tried to get the DTC scan and here are the errors that i am receiving


(Multiecuscan 5.3R1)
11/4/2025 21:06:19
Fiat Ducato (type 290) 2.3 Multijet
Body Computer Marelli (290)
--------------------------------------------------------------

ECU ISO code: BF 83 8F 0D B3
VIN code: (removed by me)
ECU serial number: (removed by me)
FIAT drawing number:
Hardware number:
Hardware version: 04
Software number: 04440009201
Software version: 0405
Homologation number: 000029
Functioning time (EEPROM): 467958
Operating time: 467962
Startups counter: 10855
VIN lock status: (this is empty)
PROXI configuration write counter: (this is empty)

READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
Operating time: 467946 min
Startups counter: 10849

2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854


READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
Operating time: 467946 min
Startups counter: 10849

2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854

3. U1703-86 - Instrument Panel node
Operating time: 467946 min
Startups counter: 10849

4. U0019-88 - B-CAN line
5. B10AA-4A - PROXI configuration control
Operating time: 467948 min
Startups counter: 10850


READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854


READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
Operating time: 467946 min
Startups counter: 10849

2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854

3. U1703-86 - Instrument Panel node
4. U0019-88 - B-CAN line
Operating time: 467950 min
Startups counter: 10850

5. B10AA-4A - PROXI configuration control

READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
Operating time: 467946 min
Startups counter: 10849

2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854


READING ERROR CODES:
1. U1736-87 - Convergence Telematic Node (NCV)
Operating time: 467946 min
Startups counter: 10849

2. U1732-87 - Tire pressure control unit (TPM)
Operating time: 467958 min
Startups counter: 10854

3. U1703-86 - Instrument Panel node
Operating time: 467946 min
Startups counter: 10849

4. U0019-88 - B-CAN line
Operating time: 467950 min
Startups counter: 10850

5. B10AA-4A - PROXI configuration control
Operating time: 467948 min
Startups counter: 10850



Is it my cable? I am using the yellow connector along with an ELM 327 version 1.5

Thank you in advance

[shpuncik]

scan whole car and check for weird CAN bus errors. could be your cable or could be something on CAN bus network which prevents getting proxi config.