Multiecuscan

you use modified verion or unmodified?

maniak8 wrote: ↑24 Jan 2020, 08:05 you use modified verion or unmodified?

honestly don't remember whether I had to modify it. I could send you some pictures of PCB and more details later

I would apprecaite your reply so i can test if cable is the problem

Attached my hardware. On ebay it said modified but i dont see any modification done

https://ibb.co/FVCYjN9
https://ibb.co/2FLLCpn

ELM327 I use, no modifications on PCB. In device manager it's shown as Prolific USB, VID_067B PID_2303. And although label says v1.5 it's 1.3, works as regular 1.3 or high-speed 1.3 in MES without problem

https://ibb.co/y8dCyg1
https://ibb.co/xLzDxQ7
https://ibb.co/Xy4s73w
https://ibb.co/mDts1Z0

thank you! I have ordered new idiagnoistics ELm327 cable and see if there is any difference

Hello,

Did you manage to sort out the issues with the ELM327 ODB adaptor. I'm having issues when on high speed mode required for the ABS connection i keep getting times outs.

The windows adaptor is set to 38400 baud and 1ms latency timer, it works ok on standard mode just not high speed.

I've got a Proscan Automotive ELM327 with is the modified version for multiECU scan, does this sound like the same issues you had please?

Currently i cant drive the car as breaks no longer work after proxi alignment procedure.

Thanks

Mike