Multiecuscan

Hi I cannot connect to the Marelli IAW5SF3.M1 engine ecu of a Feb.2006 1.2 8V. With the ELM interface set at 118K+_ baud I can only connect to the ABS and to the steering ecus.
Also has anyone successfully managed to calibrate a new aftermarket steering torque sensor with FES on this model or similar?

Thanks
Ralph

HI,
For the EPS torque calibration whit fes, no way... all the diagnostic tool and sw don't support those calibration because fiat and delphi have removed this function..

You need an external and very expensive calibration tool..
If you are interested, e-mail me..
Bye
Matteo

Thanks Matteo, but I have managed to work a way around the EPS problem using readings from FES.
I still cannot connect to the engine ecu however!

If someone is looking for the instrument to calibrate the torque sensor in EPS Delphi, I found such a thing
http://marrancone.it/index_file/Page483.htm