In this case you simply have to run the regular “CAN Setup / PROXI Alignment Procedure” (not the one for Uconnect). We added this special “Uconnect” PROXI procedure because there are many models of Uconnect devices in Fiat 500 that have software bug and do not work with regular PROXI alignment. It s...

It looks like you did not connect adapter 5 and adapter 6 when asked... It is not possible to make PROXI alignment of 500X without these adapters.

Please send us a report (from the red Send Report button in Multiecuscan) after trying to activate these functions in Body computer and we will check what is wrong...

Yes, everything works correct in Multiecuscan 3.6. You have to configure the interface as "ELM 327 1.3/1.4/1.4b/2.1 (High Speed)" in Multiecuscan.

Did you check the latency settings of the KKL interface drivers? In most cases the unstable connection is caused by high latency.

You can try the following: 1. Connect to your car with CAN Setup/PROXI Alignment and go to Adjustments 2. press ctrl+alt+c from the keyboard- Multiecuscan will open a window with title “Custom PROXI” 3. change byte 80 as follows: -if it is 00 then change it to 20 -if it is 01 then change it to 21 -i...

We released Multiecuscan 3.5 today with following changes: - Added information for more ISO codes from 2015-2016 vehicles - Added support for high speed mode of ELM327 interfaces (It is listed as ELM 327 1.3/1.4/1.4b/2.1 (High Speed) in the list of interfaces. This will switch any ELM interface to 1...

What make/model/year is the car?

The other values which you can try are 20 and 40. One of these should set it to "Sport" type.

There is no PROXI support for Renegade yet, but you can use the PROXI from Fiat 500X. You will need adapter 5 and adapter 6 during the PROXI process. Also, it may not be possible to connect to PROXI with some ELM interfaces as they are too slow, the OBDLink interfaces work ok.