Share the other side of the PCB too
Good luck
Search found 169 matches
- 21 Dec 2023, 13:35
- Forum: Usage Q&A
- Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
- Replies: 2546
- Views: 4353337
- 18 Oct 2023, 11:45
- Forum: Usage Q&A
- Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
- Replies: 2546
- Views: 4353337
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
If you do not remove the resistor you will not be able to connect to CAN BUS controlers. So use a multimeter ( ohmeter ) to check if the resistor is there 120 ohm between CAN BUS pins 6-14. If there is you have to remove the resistor. If there isn't any resistance between OBD2 pins 6-14 ( on your in...
- 02 Sep 2023, 08:18
- Forum: Usage Q&A
- Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
- Replies: 2546
- Views: 4353337
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Forget about jumpers. Use adapters especially if you wanna use Proxy Alignament. Jumper just connect together some pins to make the interface comunicate with controlers on other pins the 7 (k-lin) or 6-14(CAN BUS) The best ways is to use adpaters or as me an all-in-one adpater that let you manually ...
- 07 Aug 2023, 10:34
- Forum: Usage Q&A
- Topic: Multiecuscan Adapters
- Replies: 2
- Views: 3433
Re: Multiecuscan Adapters
Hi
Sure I sent you details from where I got it by Private Message.
Good luck
Sure I sent you details from where I got it by Private Message.
Good luck
- 20 Jul 2023, 14:18
- Forum: Usage Q&A
- Topic: Multiecuscan Adapters
- Replies: 2
- Views: 3433
Multiecuscan Adapters
Hello guys This post is just for information. I bought few months ago this all-in-one adapter. I just wanted to share my experience with you. This all-in-one adapter replace all the colored cable adapters that I used before and I do not need to change cables during the diagnostics. Me I am using an ...
- 15 Dec 2015, 08:50
- Forum: Support
- Topic: CAN NOT MAKE MES 2.2 WORK WITH WINDOWS 10
- Replies: 1
- Views: 3410
Re: CAN NOT MAKE MES 2.2 WORK WITH WINDOWS 10
Try MES v2.8R1
See if its working
Good luck
See if its working
Good luck
- 04 Sep 2015, 13:38
- Forum: Usage Q&A
- Topic: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
- Replies: 2546
- Views: 4353337
Re: FAULTY ELM 327 INTERFACES DE-MYSTIFIED (READ HERE)
Hi You can check here what controlers need adaptor A3 http://www.multiecuscan.net/SupportedVehiclesList.aspx Then your pics is not such a good. I cannot figure it out where is the rezistor that need to be removed. This is for CAN Bus but as I said you will need adaptor A3 too for controlers on CAN B...
- 19 Aug 2015, 15:23
- Forum: Support
- Topic: CanTieCAR & 3-pin auto
- Replies: 3
- Views: 4894
Re: CanTieCAR & 3-pin auto
Don't you have a chinese 3 pins adaptors?
All are the same
Take alook here: http://www.autotronic.ch/media/images/fiat-3pin-1.jpg
Good luck
All are the same
Take alook here: http://www.autotronic.ch/media/images/fiat-3pin-1.jpg
Good luck
- 10 Aug 2015, 12:09
- Forum: Support
- Topic: Multiecuscan 2.5
- Replies: 2
- Views: 6390
- 01 Aug 2015, 18:27
- Forum: Usage Q&A
- Topic: liecence expired
- Replies: 2
- Views: 4441
Re: liecence expired
- The License is also valid for 1-YEAR FREE UPDATES of the multiecuscan software. After 1 year you can continue to use the software forever, but you will not be able to update it. The price of additional 1-YEAR updates is the same as the regular REGISTERED License price (50 EUR). Check first iof you...