FIAT PANDA type 312 - 1.2 8V 69 HP year 2018

[Anona]

Hi all, I am new here and have 3 questions to the specialists:

1) Does anyone know whether MultiEcuscan 4.5 supports FIAT PANDA type 312 - 1.2 8V 69 HP of year 2018?
2) Does the MultiEcuscan 4.5 Free version support the Oil Change Reset function or do I need a licensed version?
3) Which USB hardware interface is well working for that and recommended for my car?

Thanks in advance

[Anona]

No answer? Nobody knows it? Or nobody wants to answer?

[s130]

1) The last listed Panda in the Supported Vehicles list is the 2012 Panda 1.2

2) For this vehicle all of the functions are list in RED and are thus for the paid version only of MES.

3) ELM or OBDLINK

NOTE! This is for the 2012 Panda. As 2018 Panda is not listed then technically it is not supported. However some of 2018's vehicle's ECU may be the same.

What you can do is download the free version and use SCAN function. This will list all ECUs/modules in your 2018 Panda. You can then compare with 2012 model and also other Fiat models.

[Anona]

1) The last listed Panda in the Supported Vehicles list is the 2012 Panda 1.2

2) For this vehicle all of the functions are list in RED and are thus for the paid version only of MES.

3) ELM or OBDLINK

NOTE! This is for the 2012 Panda. As 2018 Panda is not listed then technically it is not supported. However some of 2018's vehicle's ECU may be the same.

What you can do is download the free version and use SCAN function. This will list all ECUs/modules in your 2018 Panda. You can then compare with 2012 model and also other Fiat models.

Thanks a lot!