Have the dreaded flashing odometer and someone replaced the Uconnect5, my current canbus data is
Reading CAN configuration data ...
CAN CONFIGURATION DATA:
4F 84 00 05 11 00 00 00 4F 84 00 05 11 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4F 84 00 05 11 00 00 00 09 04 00 04 11 00 00 00 4F 84 00 05 11 00 00 00 09 04 00 04 11 00 00 00 09 04 00 04 01 00 00 00
30 31 31 34 35 30 31 39 37 34 31 4F 55 54 50 55 54 44 4A 49 54 20 14 09 10 4F 84 00 05 11 00 00 00 09 04 00 04 11 00 00 00 D7 C0 71 07 67 10 61 20 00 00 00 2F 07 05 00 9C 06 35 01 28 00 00 52 40 7A 41 0A 5C 0D 00 00 00 55 00 00 00 00 39 02 81 05 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 05 00 00 00 00 00 00 8E 12 00 10 00 00 02 48 00 07 00 00 00 00 00 00 03 B3 00 92
Body Computer Node (BCM/NBC)
Engine Control Node (ECM/NCM)
Electric Steering Node (EPS/NGE)
Dashboard Node (IPC/NQS)
Brake System Node (ABS/BSM/NFR)
Climate Control Node (HVAC/NCL)
Side Acceleration / Yaw Node (NYL)
Parking Sensor Node (PAM/NSP)
Airbag Node (NAB/ORC)
Tire Pressure Node (TPMS)
Entertainment Telematic Node (ETM)
(Multiecuscan 5.4)
Question is i tried changing Byte 123 from 07 to D5, 11 and 15 but didnt make any difference ....any ideas on how to stop getting the out of range error would be appriecated
Alfa Romeo MiTo 1.6 JTDm 16V
CAN Setup / PROXI Alignment Procedure (2014+)
--------------------------------------------------------------
Body Computer Node (BCM/NBC): EOL Ok
Engine Control Node (ECM/NCM): Ok
Electric Steering Node (EPS/NGE): Ok
Dashboard Node (IPC/NQS): EOL Ok
Brake System Node (ABS/BSM/NFR): Ok
Climate Control Node (HVAC/NCL): EOL Ok
Side Acceleration / Yaw Node (NYL): Ok
Parking Sensor Node (PAM/NSP): Ok
Airbag Node (NAB/ORC): EOL Ok
Tire Pressure Node (TPMS): EOL Ok
Entertainment Telematic Node (ETM): EOL Failed
EXECUTING ADJUSTMENT...
PROXI ALIGNMENT PROCEDURE
Writing CAN configuration data ...
Writing to module: Body Computer Node (BCM/NBC) SUCCESS!
Writing to module: Dashboard Node (IPC/NQS) SUCCESS!
Writing to module: Climate Control Node (HVAC/NCL) SUCCESS!
Writing to module: Airbag Node (NAB/ORC) SUCCESS!
Writing to module: Tire Pressure Node (TPMS) SUCCESS!
Writing to module: Entertainment Telematic Node (ETM) FAILED! - Request out of range error
[102A] errors: Byte 123: 07->03
FAILED TO EXECUTE
Entertainment Telematic Node (ETM) FAILED! - Request out of range error